![]() ![]() ![]() ![]() ![]() The FPGA synthesis is done using Xilinx ISE tool. The design is functionally verified by simulating the code in ModelSim from Mentor Graphics. Simulated antenna outputs are used to test the developed beam former. The VHDL simulation of all these blocks shall demonstrate the beam formation for multiple beams. The scope of the work includes the VHDL modeling of 16 element phased array antenna system and RTL implementation of complex NCO, digital mixer, low pass filter, multiplexers, demultiplexers, ROM for coefficient storage and Multiplier unit. This technique provides simultaneous beams without any compromise on functionality. The proposed technique employs multiplexed signal processing unit which is time shared for various beam formers. The conventional technique of completely duplicated hardware and also dynamic reconfiguration does not yield the real time parallel beam processing. Digital multiple beam forming on each antenna element about large phased array radar is impossible in processor based digital processing units, because it needs simultaneous processing many A/D channels.In this project we resolve this problem by using a multi array based beam forming technique with multiplexed signal processing unit on FPGA. Phased array radar is very important in modern radar development, and multiple digital beams forming technology is the most significant technology in phased array radar. Stv = phased.Abstract: Beam forming is a signal processing technique used in antenna arrays for directional signal transmission or reception. Stv = phased.SteeringVector('SensorArray',txarray) Xlim() ylim() įollowing examples shows the pattern of an array antenna with different steering angles.įollowing examples shows how the shape of an array antenna changes as the number of elements increases. Txbeam = abs(wt*steervec(txmipos,txbeam_ang)) Txarraystv = phased.SteeringVector('SensorArray',txarray,'PropagationSpeed',c) Txmipos = getElementPosition(txarray)/lambda Txarray = phased.ULA('NumElements',NoOfTxAntenna,'ElementSpacing',lambda/2) Txarray = phased.ULA('NumElements',4,'ElementSpacing',lambda/2) This is the type of array antenna that are used for MIMO (e.g, LTE MIMO). ULA is the Object that is for design and simulating the set of antenna placed along a line. ![]()
0 Comments
Leave a Reply. |
Details
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |